Caring for Your Hoffman California Batiks

Hoffman California Fabrics has been with Binky Patrol longer than any other sponsor, and their batiks are some of the most loved fabrics our volunteers get to work with. Each piece is made in Bali using the traditional batik process. Artisans apply wax by hand or with copper stamps, dye the cloth, and repeat the process layer after layer. The result is color that goes all the way through the fabric, with a depth you just don’t find in ordinary prints.

That deep, saturated dye is part of what makes these batiks so special, and it also means the first wash can carry a little extra color into the water. At our sewing days, everyone had a different way of handling it. Some people prewash everything, some never prewash, and some swear by one product or another. I spent some time researching and pulled the best of those ideas into one guide, organized by the kind of project you’re making.

A few simple steps up front will keep every color right where Hoffman put it, through years of washing in the homes of the kids who receive our binkies.

What You Will Need

You won’t need all of these for every project. The project sections below tell you which ones to use.

  • Retayne color fixative. A liquid made by G&K Craft Industries that locks dye into cotton fabric. Look for it at quilt shops or online at Dharma Trading. A 4 oz bottle goes a long way.
  • Shout Color Catcher sheets. Sold in the laundry aisle at most grocery stores. They trap loose dye in the wash water so it can’t settle on other fabric.
  • Synthrapol (optional). A specialty detergent that keeps loose dye floating in the water so it rinses away. Sold at quilt shops and Dharma Trading.
  • A kitchen or candy thermometer. Retayne only works when the water is at least 140°F, and most tap water isn’t that hot.
  • Measuring spoons. You’ll need a 1 teaspoon and a 1/4 teaspoon.
  • A plastic dishpan, bucket, or old enamel pot. Use one that is never used for food.
  • Rubber gloves. The water is hot enough to hurt bare hands.
  • White paper towels for the color test.
  • Two or three clean, old bath towels for pressing water out of small pieces.
  • An iron and ironing board.
  • A rotary cutter, ruler, and mat for trimming squares after treatment.

Start With a Quick Color Test

Before you decide whether a fabric needs any treatment at all, test it. This takes two minutes and often tells you that you can skip the extra steps.

  1. Pick the darkest pieces in your stack. Deep reds, purples, navies, and blacks are the best ones to check.
  2. Run warm water from the tap until it feels warm on your wrist.
  3. Wet just one corner of the fabric. Don’t soak the whole piece.
  4. Fold a white paper towel in half and lay it flat on the counter.
  5. Press the wet corner firmly onto the paper towel and hold it there for about 10 seconds.
  6. Lift the fabric and look at the paper towel.

If the paper towel is clean or barely tinted, that fabric is ready to sew as is. Use Color Catchers on the first wash of the finished project and you’re done.

If you see a clear patch of color, that fabric has extra dye to release. Follow the method for your project below.

Choose the Method That Fits Your Project

Yardage and Fat Quarters

Uncut yardage and fat quarters are the easiest pieces to treat, because they haven’t been cut to an exact size yet. Treat them with Retayne before you cut anything.

A note about washing machines. Newer high-efficiency front loaders and top loaders don’t fill with enough water for Retayne to work. If you have one of these, use the dishpan or bucket method below. If you have an older top loader that fills all the way, you can use it instead.

Dishpan or bucket method

  1. Figure out how much fabric you have. Count each yard as one yard, and count four fat quarters as one yard.
  2. Put on your rubber gloves.
  3. Heat water on the stove or in a kettle. You’ll need enough to cover the fabric completely with room for it to move around.
  4. Pour the hot water into your dishpan or bucket.
  5. Put the thermometer in the water. Add more hot water or let it cool until it reads 140°F. If it drops below 140°F, add a little more boiling water.
  6. Measure 1 teaspoon of Retayne for each yard of fabric and stir it into the water.
  7. Add the dry, unwashed fabric. Push it under the water with a wooden spoon or your gloved hand so every part is wet.
  8. Let it soak for 20 to 30 minutes. Stir it gently every 5 minutes or so.
  9. Lift the fabric out and rinse it in cool water until the water runs clear.
  10. Wash the fabric in your machine in warm or cool water with your regular detergent. If you like, you can use Synthrapol instead, following the directions on the bottle.
  11. Tumble dry or hang to dry.
  12. Press the fabric before you cut.

You only need to treat fabric with Retayne once. From then on, wash it in warm or cool water. Very hot washes can loosen the fixative over time.

Five-Inch Charm Squares for Binkies

For most charm square binkies, the best plan is to sew the squares straight from the pack. Charm squares are already cut to an exact size, and soaking them can make them shrink unevenly or fray along the pinked edges. That can throw off your quarter-inch seams.

The good news is that batiks have a very tight weave, so they fray much less than regular quilting cotton. Keeping them dry and crisp makes accurate piecing much easier.

  1. Do the color test on your darkest squares.
  2. If the test is clean, sew all your squares straight from the pack.
  3. If one or two colors show heavy transfer and they’ll sit next to white or very light fabric, you can treat just those squares using the small-piece method in the next section.
  4. Give the finished binky its first wash with Color Catchers, following the steps under The First Wash of a Finished Binky.

Charm Squares Sewn Onto Towels

Batik squares make a beautiful accent band across a set of bath or kitchen towels. Towels are usually light colored and get washed often, so these are the squares worth treating before you sew.

Get the towels ready first

  1. Wash and dry the towels before you sew anything onto them. Towels shrink in their first wash, and you want that to happen before the band goes on.

Treat the squares

  1. Pull out only the squares you’re using for the towel bands.
  2. Sort them into small piles by color, darks with darks and lights with lights.
  3. Put on your rubber gloves.
  4. Fill a bowl or small dishpan with water heated to 140°F. Check it with the thermometer.
  5. Stir in 1/4 teaspoon of Retayne for a small handful of squares (about 10 to 12).
  6. Slide the squares into the water one at a time so they lie flat.
  7. Let them soak for 20 to 30 minutes. Don’t stir or swish them around. Moving them can fray the edges.
  8. Lift each square out carefully and lay it flat on a clean, old bath towel.
  9. Lay a second towel on top and press down with your hands to soak up the water. Don’t wring or twist the squares.
  10. Iron each square dry on the cotton setting. Press straight down and lift, rather than sliding the iron back and forth, so the square doesn’t stretch.
  11. Stack the dry squares and check their size with your ruler. If some came out a little smaller, trim all of them to match the smallest one. Even a tiny bit of trimming keeps your band straight.

Sew and care for the towels

  1. Piece your band and sew it onto the towels.
  2. Wash the finished towels in warm or cool water. Retayne holds up best when it isn’t washed in very hot water.
  3. Add 2 or 3 Color Catcher sheets to the first few washes for extra peace of mind.

Binkies With Batik Backs

When both the front and back are batik, sew the squares straight from the pack and give the finished binky its first wash with Color Catchers. If any of your backing yardage tested heavy, treat that yardage with Retayne before you cut it, using the yardage method above.

Binkies With Fleece or Minky Backs

Fleece and minky are polyester. They don’t soak up cotton dye the way cotton does, which makes them a very forgiving partner for batiks.

  1. Sew the squares straight from the pack.
  2. When you press seams on the batik top, keep the iron on the cotton fabric only. Never let a hot iron touch fleece or minky. The fibers melt instantly.
  3. Give the finished binky its first wash with Color Catchers.
  4. Tumble dry on low heat to keep the fleece or minky soft.

The First Wash of a Finished Binky

This first wash is the most important one. It’s when any extra dye releases, and the Color Catchers take care of it.

  1. Set your washing machine to cold water and the gentle or delicate cycle.
  2. Add your regular detergent.
  3. Add 4 to 6 Shout Color Catcher sheets. Use the higher number for bigger binkies or lots of dark colors.
  4. Put the binky in by itself, with no other laundry.
  5. Run the full cycle.
  6. Take out the Color Catchers and look at them. If they’re heavily colored, run a second rinse cycle with fresh sheets.
  7. Check the binky. Once the sheets come out light, it’s ready to dry.
  8. Tumble dry on low heat, especially for binkies with fleece or minky backs.

Good Habits to Keep

  • Treat fabric before you sew, never after. A pieced top has open seams and bias edges that fray badly in a hot soak. A finished binky is too big to keep at 140°F long enough for Retayne to work.
  • Treat yardage, not precuts, whenever you can. If you know a project will need treated fabric, it’s easier to treat the yardage and cut your own squares.
  • Keep treated and untreated pieces labeled. A sticky note on each stack saves a lot of guessing later.
  • Use Color Catchers on the first wash of every finished batik binky. It’s an inexpensive step that takes no extra time.

Quick Reference

How to prepare and wash Hoffman batiks by project type
Project Treat with Retayne before sewing? First wash of the finished piece
Uncut yardage or fat quarters Yes, if the color test shows transfer Warm or cool water, regular detergent
Charm squares for an all-batik binky No, sew from the pack Cold, gentle, 4 to 6 Color Catchers
Charm squares with fleece or minky backs No, sew from the pack Cold, gentle, 4 to 6 Color Catchers, low dry
Charm squares for towel bands Yes, small-piece method Warm or cool water, 2 or 3 Color Catchers
A single very dark square next to white Optional, small-piece method Cold, gentle, 4 to 6 Color Catchers

Thank You, Hoffman California Fabrics

Every binky made with Hoffman batiks carries a bit of Bali’s artistry to a child who needs comfort. We’re grateful to Hoffman California Fabrics for their generosity and their many years of partnership with Binky Patrol, and we love seeing what our volunteers create with their fabric.